The freezer needs to be maintained properly if you wish to get the best results from the appliance. The maintenance can increase the efficiency and the lifespan of the freezer. Display Freezers with Glass Door are used to store food and keep it fresh and nutritious for long periods of time. One of the most important steps of glass door freezer maintenance is defrosting the appliance. In order to avoid large accumulation of frost in your freezer you need to have excellent door seals.
Defrosting can be a very time consuming activity as it can take hours. There are certain steps of how to defrost the glass door freezer:
- Remove all the food products.
- Power should be turned off.
- Get soft towels and a bucket.
- Wait for the defrosting process to take its time or speed up the process.
- Clean and dry the freezer properly.
- Turn the freezer on and let it cool.
- Reload the food products.
Here are some of the processes which can be used to speed up the process of defrosting if you are short of time or you have food items which may get spoiled if kept at room temperature for long hours.
Reasons to Buy a Glass Door Freezer
Hot water method:
This method can really speed up the defrosting process. All you have to do is tale a Pan or a bucket and fill it water. Get that water warmed up and then place it inside the freezer and close the door. Leave the pan inside the freezer for about 5 minutes, take it out, heat it again and put it back in to the freezer. Continue to do this until all of the ice is melted in your Husky glass door freezer. It is a little tiring to heat the pan again and again but it can speed up the defrosting process.
Fan method:
Another method that can be used to decrease the time of defrosting, you can simply put a fan outside freezer and leave the door of freezer open. Opening the freezer door with a fan in front of it will allow the air to flow freely in it and will melt the ice more quickly.
Blow Drier Defrosting method:
It can speed up the defrosting process but it is not the safest method because blow driers and water is not a very good combination.
Scrapper method:
Scrapping the accumulated ice is the most common way of speeding up the defrosting the freezer, but it is important to be very careful while doing it. No sharp objects should be used because they can damage the appliance. The scrapping can make punctures in the freezer which can lead to leakage. Using a dull objects like plastic spatula or a spoon are much better objects in order to clean the accumulated ice inside the freezer. If this method is combined with the blow drying method, it can decrease the defrosting time considerably. You can use the dryer to make the ice a little loose then you can use a spatula and a spoon to scrape the ice. It makes it very easy to get rid of any accumulated frost.
